Thomas Compressor?

[fimmel]

Remember that R68 limits the CFM from any compressor used. May need to take a look at you design to require less air.

R68 Compressed air on the ROBOT must be provided by one and only one compressor. Compressor specifications may not
exceed nominal 12VDC, 1.05 cfm flow rate.

EDIT:

Looking at the specs from both compressors, the new Vaiar compressor actually has a .08cfm higher flow rate.

Thomas Compressor Information: http://www.gd-thomas.com/product.aspx?id=12084&tp=p
Viair Compressor Information: http://www.andymark.com/product-p/am-2005.htm