What's your Build Pace this year?

[inabilityness]

Last year we didn't really start building until halfway through the season. This year, we already have our chassis, a solid plan, and most of our arm

[CoachC]

It looked sooooo good on paper! Now its toilet tissue !!!!

[Rypsnort]

We just finished chassis tonight and are sending our CAD drawings out to get cut by a sponsor. Should have those parts by Friday. Then hopefully we can asseble it pretty quickly. All the parts should fit nicely because we CADed them first.

[Tammyo]

This year our build pace has increased exponentially; we have gotten a chassis, lift, and electronics almost done on our prototype. This year we are trying to stick to our calendar and get our prototypes finished as soon as possible so we can start driver practice and our final robot. The calendar was made the week before kickoff to not be influenced by the game. So far our productivity has been exponentially better compared to past years.

[g_sawchuk]

We are currently sending pieces in to be manufactured, and we have the base electrical of our robot done. In my opinion, we are pretty behind, but I hope that we will finish with a good robot.

[z_beeblebrox]

Practice robot drivetrain and electrical done. Practice robot elevator 90% done. Can grabber prototype done. Parts ordered for competition robot drivetrain, will be cut out later this week.

A couple days behind our target schedule, but still OK.

[GortGortGort]

Last year was our rookie year and we had problems . This year with 95 percent
new kids they hit the ground running . Had the base built two days after kick off and this is a photo of the robot at week 3 .

http://www.chiefdelphi.com/media/img...e44c2d88_l.jpg

This is a photo of there drive station just built yesterday.

https://www.facebook.com/photo.php?f...type=1&theater

We were also able to afford to go to two regional this year.
So we are doing much better this year.