|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
|
||||
|
||||
|
Re: encoders
Properly done, they work well. Properly means the optic wheel is clean & undamaged. The shaft the optic wheel is on needs to be concentric & have very little end float. The optic wheel needs to be tight on the shaft & properly positioned. Other encoders that have their own shafts & bearings are easier to set up & use.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|