|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: pic: Team 1188's Current Design
I expect that you're allowed to have the numbers as shown, as "decoration"...but you still need to have some black numbers on a white background, as specified in the rules, eh?
|
|
#2
|
||||
|
||||
|
Re: pic: Team 1188's Current Design
You could move the team numbers onto the side and also onto the black flat surface on your elevator.
|
|
#3
|
|||
|
|||
|
Re: pic: Team 1188's Current Design
I'm curious as to what the pistons in the back do
|
|
#4
|
||||
|
||||
|
Re: pic: Team 1188's Current Design
My guess is that horizontal one ejects the stack. The vertical one I'm not so sure about.
|
|
#5
|
||||
|
||||
|
Re: pic: Team 1188's Current Design
How are you handling side loads? The slightest mislignment of the elevator siderails can cause racking if you don't have bearings of some sort there.
EDIT:How are you braking your elevator? Is that piston in the back for ejecting a stack? Are you certain that your carriage bearings and 2x1 can take the loads of the tote stack you will be handling? |
|
#6
|
||||
|
||||
|
Re: pic: Team 1188's Current Design
I remembered seeing this yesterday in the Q&A:
Game - The Robot » General Robot Design Q207 Q. In R2, can the team number be vertical on the robot on at least one side? - FRC4470 on 2015-01-17 A. No, a vertical team number could be ambiguous, and doesn't meet the requirements of R2. - Published by GDC |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|