FRC 2015 Control System Visio Stencils

[Ken P.]

Hi All,

My son put together some handy stencils for Visio that will let you create a quick wiring layout for the control system. I put them up on our team's GitHub page at:

https://github.com/kpeirce/FRC2015ControlsVisioStencils

Hints:

1. The connectors (cables or wires) must be on the layer above the component (e.g. roboRio) to be able to connect to the attachment point on the component.
2. For cables composed of multiple wires, there are single attachment points. This permits easier connection with the cable connectors (e.g. CANbus). (As opposed to trying to connect each individual wire.) Hopefully this will assist folks.

See you on the field!
Ken

[goofy173]

Nice set. Just what I was looking for as a matter of fact.

Just need regular Talons and Victors and a real representation of the Dlink.

[Ken P.]

Zachary added the older control systems components that were requested along with a more realistic router.

Go to:

https://github.com/kpeirce/FRC2015Co...ls/tree/master

and download the zip file.
Enjoy!