|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Factory reset a RoboRIO?
We were testing our roboRIO and rebooted the robot in the process. When the robot booted up, the roboRIO became totally unresponsive. I can't get any comms to it through WiFi, Ethernet, or USB. The flasher tools and 172.22.11.2 aren't able to connect.
I'm looking through the roboRIO user manual for a factory reset function and I can't seem to find one. The "reset" key only boots the roboRIO into safe mode. How do I completely reset the roboRIO to factory reset mode? or atleast if anyone has had similar symptoms to what I am experiencing? |
|
#2
|
||||
|
||||
|
Re: Factory reset a RoboRIO?
Quote:
|
|
#3
|
||||
|
||||
|
Re: Factory reset a RoboRIO?
Thanks for the #, I'll have to use it sometime. Apparently the built-in mDNS resolver on the roboRIO isn't working, I had to enable the mDNS on the router and connect through the router instead. Silly that this completely disables straight-through ethernet as well as USB (which is proclaimed as "the only safe way to image the device")
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|