PROTRUSIONS QUESTION

[Mr V]

Originally Posted by dtengineering

I'd encourage FIRST to consider a scaled up version of the laser sizing box I built for use at our VEX tournaments.

It is brutally effective... and quick. http://www.vexforum.com/showthread.p...t=laser+sizing

But more likely there will be a more traditional sizing box.

Jason

The current official ruling on how the footprint portion of the sizing will be checked is with a tape outline on the floor. The height will be checked with a tape measure. I can see a plumb bob being used in the case of robots that are in a "mushroom" shape in the transport configuration.