Trying to read current from the PDP

I don't care what Dean, Dave, Woodie, or whoever says at kickoff--if it isn't in the rules, it isn't in the rules. - EricH [more]

		Chief Delphi > Technical > Control System
Trying to read current from the PDP

Thread Tools

Rate Thread

Display Modes

#11

22-01-2015, 17:40

franktate

Registered User

FRC #2614

Join Date: Apr 2014

Location: Morgantown, WV, USA

Posts: 7

franktate is an unknown quantity at this point

Re: Trying to read current from the PDP

It is a CIM motor driving nothing. So it could be that there's simply not enough draw to register, and I can believe that. I don't have access to it right now, but once I do, I'll put a load on the motor and also try moving the leads to a different channel.

Thanks a lot for the reply!

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 23:38.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.