|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Designing with Pneumatics-Catcher
Hello all,
My team is thinking about using two 3/4 bore pneumatic cylinders to power a linear motion catcher instead of a pivoted one. The question is: can the two cylinders take the load(~40 lbs) downwards from the stack once it's mounted horizontally? Also the way I'm thinking about mounting it to be a non-pivotal arm is to foot bracket it fixed to the base and turn the end clevis 90 degrees and run a bolt through to the arm. Newbies need them feedback! Thanks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|