|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Problem with KitBot: Motors move at different speeds
You can do some troubleshooting by only powering one of the motors on each side at a time. Remove the circuit breaker from the power going to the other one. See if one of the motors is turning slower with a given throttle command.
The advice to calibrate the speed controllers is good. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|