Two Motors one PWM help?

[notmattlythgoe]

Originally Posted by RoboBucs

Ok, so the way it's set up, we have two motors hooked up to PWM 2, and the other two motors are hooked up to one each, PWM 0, and PWM 1. We can get the ones in PWM 0 and 1 to work, but it's the one in PWM 2 that we are having trouble with. It seems to be wired electrically fine I just can't get it work in labview. If it helps I can post some screenshots of what we have, just tell me if you need them.

This unfortunately is not legal, each motor controller must be hooked up to one port.

R57 Every relay module, servo, PWM motor controller shall be connected to a corresponding port on the roboRIO or via a legal MXP connection.