Queen City door issues?

[Bruceb]

We are going to attend the QC regional for the first time this year and with the height of the robots I had a question.
From the pits to the arena are there any standard height doors you need to go through?

Thanks

[Mr. Mike]

The pratice field and some of the pits are in an auxiliary gym. There is a hallway and at least one doorway. Jimmy from 1038 may have more info on size.

Mr Mike

[Bruceb]

so 78 inch robots on carts are likely not to fit without considerable tipping or dis-assembly?

[Mr. Mike]

Originally Posted by Bruceb

so 78 inch robots on carts are likely not to fit without considerable tipping or dis-assembly?

We are looking at modifying our cart with a cradle to tilt the robot during transport.

[Gregor]

Originally Posted by Bruceb

so 78 inch robots on carts are likely not to fit without considerable tipping or dis-assembly?

This will likely be the case for most venues. Our poor driveteam will be taking the robot off for every door.

[bkahl]

I have a feeling that furniture dollies are going to be very popular for robot carts this year...

[wilsonmw04]

Originally Posted by Bruceb

We are going to attend the QC regional for the first time this year and with the height of the robots I had a question.
From the pits to the arena are there any standard height doors you need to go through?

Thanks

There are no low entrances at QC that I remember from last year. You should have no problem.

[mschwab013]

I dont remember the auxiliary gym having any standard doors. You should be fine

[Jimmy Nichols]

Leaving the Auxillary Pit area where the practice field is located will have clearance issues. Though it is not a standard door, it is only ~93 inches from the floor, so the height of your cart to the floor would determine whether a 78 inch robot would clear. When we get all of the information together for this years event, including the above, I will be sending out an Event Manual detailing this.