Joystick issues

[RoboBucs]

The problem with doing that is that we can't use an arcade drive with the robot because we can't use an open two motor, unless you have a way to make it work by assigning the same pwm twice(or some other way around that). We have both of our left motors wired through PWM 0 and both of our right motors wired through pwm 1. Which is what's making it so absolutely frustrating, we had it moving fine back when we weren't using a cable splitter and I could use open 2 motors with an arcade drive, but 2 of our pwm wires messed up so now we have no choice but to use a splitter.

[Mark McLeod]

Yes it will work.
Create a new project and it will do what you want out of the box.
Do not touch anything in the code.
Keep your PWM splitters where they are.

[RoboBucs]

Originally Posted by Mark McLeod

Yes it will work.
Create a new project and it will do what you want out of the box.
Do not touch anything in the code.
Keep your PWM splitters where they are.

Looking at this now I cannot believe how stupid I am I've been working on this for 3 days and I just can't believe how stupidly simple this is. Thank you both so much for your help!