|
Gyro gets lost
We are new at using gyro, but have tried to read up on them. We are using C++ and are reading back the angle from a gyro. We are using the KoP gyro that is half of the am-2067 board.
Our problem is that when moving the gyro around (twisting it), it will measure to 90' fine and then back to 0', but after twisting it a few time it will lose track of where it is pointing. After twisting it around and back for 20 seconds or so, it will read ~20' at the origin (0') position. Is this normal? This does not seen to be related to drift. We have 2 gyros and they both do this same thing.
If this is normal operation, then how do you keep orientation on the field while using a mecanum drive? If this in not normal, then any suggestions would be greatly appreciates!
|
We need to find the female engineering mentors in FIRST and start having them present/co-present technical conferences at the championships. We need to start showing the girls on the teams that there are female engineering "rock stars" to look up to. - Kims Robot [more] 
Threaded Mode