pic: TALEN-A Talon SRX breakout board top view

[MrForbes]

That's the problem with building a plywood robot... you don't think about swarf shorting things.

[nixiebunny]

I chose the same male PWM connectors that are on the roboRIO, because they are the standard connectors that every team already has dozens of cables to fit. The encoder connectors take the same plug on both ends of the cable, so you only have to buy one type of plug for the cables.

The board can be populated with any 0.1" pitch connectors you like.

[Foster]

Originally Posted by MrForbes

That's the problem with building a plywood robot... you don't think about swarf shorting things.

Good point, but here on the East Coast we call plywood swarf "saw dust" but I saw what you did there....

Originally Posted by nixiebunny

I chose the same male PWM connectors that are on the roboRIO, because they are the standard connectors that every team already has dozens of cables to fit. The encoder connectors take the same plug on both ends of the cable, so you only have to buy one type of plug for the cables.

The board can be populated with any 0.1" pitch connectors you like.

Makes good sense, thanks for the thought process behind the design.