Go to Post buying an iPhone...$599. Monthly service charge...$59. Going to an Apple store just to post on CD... Priceless!:p - Schnabel [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 31-01-2015, 14:50
Potatoes's Avatar
Potatoes Potatoes is offline
Registered User
AKA: Eric Wittmann
FRC #5136 (Mecha Pirates)
Team Role: Programmer
 
Join Date: Jan 2014
Rookie Year: 2014
Location: Santa Ynez, CA
Posts: 17
Potatoes is an unknown quantity at this point
20 AMP power to motor controllers?

We have run out of 40AMP slots on our power distribution board, we were wondering if it's possible to attach our other 2 motors to the 20AMP slots. The motor controllers are Victor 888's. Is there any restriction on the size of the motor that can be connected?
  #2   Spotlight this post!  
Unread 31-01-2015, 15:03
GavinoSkaar GavinoSkaar is offline
Registered User
FRC #3219 (TREAD)
Team Role: Electrical
 
Join Date: Jan 2015
Rookie Year: 2013
Location: Auburn, Washington
Posts: 3
GavinoSkaar is an unknown quantity at this point
Re: 20 AMP power to motor controllers?

You can hook up motor controllers to the PD board according to the game manual, but you cannot hook up the motor controllers to CIM motors. It's under the 4.8: Power Distribution Section in the manual.
  #3   Spotlight this post!  
Unread 31-01-2015, 15:08
orangemoore orangemoore is offline
Registered User
AKA: Roger Moore
FRC #3135 (Robotic Colonels)
Team Role: College Student
 
Join Date: Dec 2012
Rookie Year: 2013
Location: Chicago
Posts: 2,310
orangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond repute
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by GavinoSkaar View Post
You can hook up motor controllers to the PD board according to the game manual, but you cannot hook up the motor controllers to CIM motors. It's under the 4.8: Power Distribution Section in the manual.
Why?

Point exactly to what rule says that.
__________________
Stronghold


Student 2013-2016
3135 -- Robotic Colonels
3507 -- Robotheosis (FTC)
  #4   Spotlight this post!  
Unread 31-01-2015, 15:12
GavinoSkaar GavinoSkaar is offline
Registered User
FRC #3219 (TREAD)
Team Role: Electrical
 
Join Date: Jan 2015
Rookie Year: 2013
Location: Auburn, Washington
Posts: 3
GavinoSkaar is an unknown quantity at this point
Re: 20 AMP power to motor controllers?

Tables 4-2 and 4-4 show what can be hooked up to the right terminal. And I think CIM motors just need more amperage to operate.
  #5   Spotlight this post!  
Unread 31-01-2015, 15:16
orangemoore orangemoore is offline
Registered User
AKA: Roger Moore
FRC #3135 (Robotic Colonels)
Team Role: College Student
 
Join Date: Dec 2012
Rookie Year: 2013
Location: Chicago
Posts: 2,310
orangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond reputeorangemoore has a reputation beyond repute
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by GavinoSkaar View Post
Tables 4-2 and 4-4 show what can be hooked up to the right terminal. And I think CIM motors just need more amperage to operate.
I don't think that is what that means.

Quote:
Table 4-2: Branch Circuit Protection
Branch Circuit Circuit Breaker Value Quantity Allowed Per Breaker

Motor Controller Up to 40A 1
It can be run on any breaker up to 40A it does not have to though.
__________________
Stronghold


Student 2013-2016
3135 -- Robotic Colonels
3507 -- Robotheosis (FTC)
  #6   Spotlight this post!  
Unread 31-01-2015, 15:19
GavinoSkaar GavinoSkaar is offline
Registered User
FRC #3219 (TREAD)
Team Role: Electrical
 
Join Date: Jan 2015
Rookie Year: 2013
Location: Auburn, Washington
Posts: 3
GavinoSkaar is an unknown quantity at this point
Re: 20 AMP power to motor controllers?

It's very possible I'm wrong.
  #7   Spotlight this post!  
Unread 31-01-2015, 17:36
Fletch1373's Avatar
Fletch1373 Fletch1373 is offline
Registered User
AKA: Fletch
FRC #3181 (Panthers)
Team Role: Mentor
 
Join Date: Jan 2008
Rookie Year: 2004
Location: Rochester, NY
Posts: 251
Fletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud of
Re: 20 AMP power to motor controllers?

I've been unable to find a rule this year that specifies what motors are allowed to be connected through what breakers, but historically CIMs have required 40A breakers. This is due to it having a much higher stall current(in the 60A range if memory serves).

If you do decide to put a CIM on a 20A breaker, just remember that the breaker is there to protect the wire, but there's still a chance of the high current burning out the wire before the breaker trips if the motor stalls. The AWG requirement in table 4-3 is just a minimum, so feel free to go higher in this case.
__________________
Student:
<04: FRC0213> <05-08: FRC1373>
Mentor:
<09-10: FRC0809> <11-12: FRC3555> <12-14: FRC0073> <15-??: FRC3181>
Volunteer:
<FTAA> <CSA> <Defense Coordinator> <Scorekeeper> <Robot Inspector> <Official Scorer>
2016 Tour:
CTWAT [DefCoord] > Pittsburgh[Mentor/DefCoord] > TVR[FTAA] > FLR[CSA] > NE DCMP[CSA] > CMP[CSA]
  #8   Spotlight this post!  
Unread 31-01-2015, 17:47
Chris_Ely's Avatar
Chris_Ely Chris_Ely is online now
Registered User
AKA: luckof13
FRC #3414 (HackBots)
Team Role: College Student
 
Join Date: Jan 2010
Rookie Year: 2010
Location: Farmington, Michigan
Posts: 366
Chris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond reputeChris_Ely has a reputation beyond repute
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by Fletch1373 View Post
I've been unable to find a rule this year that specifies what motors are allowed to be connected through what breakers, but historically CIMs have required 40A breakers. This is due to it having a much higher stall current(in the 60A range if memory serves).

If you do decide to put a CIM on a 20A breaker, just remember that the breaker is there to protect the wire, but there's still a chance of the high current burning out the wire before the breaker trips if the motor stalls. The AWG requirement in table 4-3 is just a minimum, so feel free to go higher in this case.
As far as I know, there hasn't been a rule limiting certain motors to breaker sizes. The rules dictate the minimum wire gage that can be connected to a certain size breaker.
The CIM's stall current is 133A at 12V.
__________________
2013: Waterford Finalist, Livonia Winner, MSC Quarterfinalist, Curie Division
2012: Waterford, Northville, Livonia
2011: Waterford Finalist, Livonia
2010: Ann Arbor Rookie Inspiration Award, Troy

Mechanical Engineering Student,
Michigan Technological University

Last edited by Chris_Ely : 31-01-2015 at 18:02.
  #9   Spotlight this post!  
Unread 31-01-2015, 19:25
PAR_WIG1350's Avatar
PAR_WIG1350 PAR_WIG1350 is offline
Registered User
AKA: Alan Wells
FRC #1350 (Rambots)
Team Role: Alumni
 
Join Date: Dec 2009
Rookie Year: 2009
Location: Rhode Island
Posts: 1,190
PAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond reputePAR_WIG1350 has a reputation beyond repute
Re: 20 AMP power to motor controllers?

The limiting factor regarding what motors can use what breakers is purely the fact that some combinations will not work well. As long as your wire gauge matches the breaker size, safety will not be an issue, as such, they appear to have decided not to create a rule that explicitly lists allowed or disallowed motor and breaker combinations.

My advice is to find the motor documentation and prioritize which motors get the 40 amp circuits based on that.
__________________
  #10   Spotlight this post!  
Unread 01-02-2015, 00:36
GeeTwo's Avatar
GeeTwo GeeTwo is offline
Technical Director
AKA: Gus Michel II
FRC #3946 (Tiger Robotics)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Slidell, LA
Posts: 3,723
GeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond repute
Re: 20 AMP power to motor controllers?

I agree that there are no rules forbidding connecting a CIM to a motor controller on a 20A breaker. However, unless you just happen to have a stack of CIMs in your inventory and no smaller motors, this is rather like getting a truck with a V8 engine then feeding it with a tiny fuel line. You'd be better off using a mini-CIM or other mid-size "unlimited" motor which will perform better at 20A.
  #11   Spotlight this post!  
Unread 01-02-2015, 03:47
asid61's Avatar
asid61 asid61 is offline
Registered User
AKA: Anand Rajamani
FRC #1072 (MVRT)
Team Role: Mechanical
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Cupertino, CA
Posts: 2,231
asid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond repute
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by GeeTwo View Post
I agree that there are no rules forbidding connecting a CIM to a motor controller on a 20A breaker. However, unless you just happen to have a stack of CIMs in your inventory and no smaller motors, this is rather like getting a truck with a V8 engine then feeding it with a tiny fuel line. You'd be better off using a mini-CIM or other mid-size "unlimited" motor which will perform better at 20A.
+1. The extra power of the cim will be deadweight on a 20 amp breaker.
I would be concerned about running down the battery if I was using up every single 40 amp slot and still needed more cims.
  #12   Spotlight this post!  
Unread 01-02-2015, 04:46
Fletch1373's Avatar
Fletch1373 Fletch1373 is offline
Registered User
AKA: Fletch
FRC #3181 (Panthers)
Team Role: Mentor
 
Join Date: Jan 2008
Rookie Year: 2004
Location: Rochester, NY
Posts: 251
Fletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud ofFletch1373 has much to be proud of
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by Chris_Ely View Post
As far as I know, there hasn't been a rule limiting certain motors to breaker sizes. The rules dictate the minimum wire gage that can be connected to a certain size breaker.
The CIM's stall current is 133A at 12V.
Thanks for the correction on stall current. I was honestly just guessing on the number because I couldn't easily look it up, but I knew it was well above 40A.

Anyway, I've been an inspector multiple times over the last 7 years I've been volunteering and have had to tell teams to change where CIM motors could be wires. This means it was on the inspection checklist, which means there was a rule for it. You may be true that there was no explicit list of what motors could be connected to what breakers, but there has been a rule in the past that said what breaker a CIM had to be on. I just woke up, so I'll update this comment as soon as I'm coherent enough to go find a source.
__________________
Student:
<04: FRC0213> <05-08: FRC1373>
Mentor:
<09-10: FRC0809> <11-12: FRC3555> <12-14: FRC0073> <15-??: FRC3181>
Volunteer:
<FTAA> <CSA> <Defense Coordinator> <Scorekeeper> <Robot Inspector> <Official Scorer>
2016 Tour:
CTWAT [DefCoord] > Pittsburgh[Mentor/DefCoord] > TVR[FTAA] > FLR[CSA] > NE DCMP[CSA] > CMP[CSA]
  #13   Spotlight this post!  
Unread 01-02-2015, 09:20
TFleig78's Avatar
TFleig78 TFleig78 is offline
Registered User
AKA: Tyler
FRC #0078 (Air Strike)
Team Role: Programmer
 
Join Date: Jan 2013
Rookie Year: 2012
Location: Rhode Island
Posts: 58
TFleig78 will become famous soon enoughTFleig78 will become famous soon enough
Re: 20 AMP power to motor controllers?

Quote:
We have run out of 40AMP slots on our power distribution board, we were wondering if it's possible to attach our other 2 motors to the 20AMP slots. The motor controllers are Victor 888's. Is there any restriction on the size of the motor that can be connected?
The smaller slots on the PDP can use 30A breakers
  #14   Spotlight this post!  
Unread 01-02-2015, 09:50
Dale27 Dale27 is offline
Registered User
FRC #0027
 
Join Date: Jan 2015
Location: United States
Posts: 1
Dale27 is an unknown quantity at this point
Re: 20 AMP power to motor controllers?

The SIMS come with a 14 gauge wire pigtail. Based on the wiring gauge table, does that limit it to a 30 amp breaker?
  #15   Spotlight this post!  
Unread 01-02-2015, 10:18
TFleig78's Avatar
TFleig78 TFleig78 is offline
Registered User
AKA: Tyler
FRC #0078 (Air Strike)
Team Role: Programmer
 
Join Date: Jan 2013
Rookie Year: 2012
Location: Rhode Island
Posts: 58
TFleig78 will become famous soon enoughTFleig78 will become famous soon enough
Re: 20 AMP power to motor controllers?

Quote:
Originally Posted by Dale27 View Post
The SIMS come with a 14 gauge wire pigtail. Based on the wiring gauge table, does that limit it to a 30 amp breaker?
There is an exception to R38 that states : "Wires that are recommended by the device manufacturer or originally attached to legal devices are considered part of the device and by default legal. Such wires are exempt from R38."

So the way I read the rule, a cim may be used in a 40A breaker, assuming all of the wire leading to the motor is 12AWG, not including the stock pigtails.
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 20:33.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi