Occasionally losing robot code while enabled

[RufflesRidge]

Originally Posted by RufflesRidge

Is there a specific period to it (the charts tab or log viewer may help here)?

Can you please answer the question I posted above.

[Lloydpro]

Originally Posted by RufflesRidge

Can you please answer the question I posted above.

Sorry about that. It appears to be happening at the same point in the graph, approximately between 50 and 55 seconds into the 1m length.

[RufflesRidge]

There are a few periods of around 1 min that have typically been traced to a WiFi driver. I would check if there are any updated drivers available or if the issue also occurs with another computer as the DS (this assumes that the issue doesn't happen when tethered).

You may also want to look for any type of update service that may be running.

[Lloydpro]

Originally Posted by RufflesRidge

There are a few periods of around 1 min that have typically been traced to a WiFi driver. I would check if there are any updated drivers available or if the issue also occurs with another computer as the DS (this assumes that the issue doesn't happen when tethered).

You may also want to look for any type of update service that may be running.

Alright. Ill check it out and see what I can do. Thanks for your help. Ill respond if I try all of the things that you suggested and none of them work.