|
Test bed Motor Trouble
Our team has a separate testbed with its own roboRIO, PDP, PCM, etc; we are using four properly ID'ed Talon SRXs on both, with miniCIMs on the robot and bag motors on the testbed, however we have a problem where, despite being in the exact same layout with the exact same code, the motor direction is flipped from the testbed to the robot, we have repeatedly ensured that the wiring is correct and nothing has fixed our problem. Have any other teams had a similar problem and/or have advice? As always all help is appreciated,
-Jack
|
P.S. While I doubt Karthik's "Delgado" jersey would go for $500,000... it would be much cooler to see Carlos Degado wearing a "Kanagasabapathy" jersey. THAT I might pay for! - dtengineering [more] 
Threaded Mode