Wiring AXIS M1013 to 2015 system

[tStano]

Originally Posted by Alan Anderson

Is anything wrong with the CPR-360 power converter you probably already have from past years? If you want to use a new one, AndyMark sells them as the am-0899.

That's only rated 10-30v; and the camera needs a super specific voltage range. I'm wary of that rating. Our batteries routinely go below 10v at competion. Have you had experience running a camera off that straight off battery voltage?

Edit: I understand I could run that off the 12v rail of a VRM, but then I'm wary of current draw through that 20A fuse with a compressor and solenoids. I understand I could put the compressor on a spike, but I'd rather not because I don't want one more thing to troubleshoot, and we're running low on DIO pins for the pressure switch.