|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Split numbers on Robot
Are we allowed to split up the logo with our team number on the robot or do they need to be right next to each other.
Thank you for your help. |
|
#2
|
||||
|
||||
|
Re: Split numbers on Robot
Q145 Q. 1) in R2 Does the number have to remain unobscured on all sides of the robot throughout the match, or may one side be partially blocked by game elements during portions of the match 2) Can the team number be split across two placards on any given side of the robot (as in 2014)
FRC1983 on 2015-01-12 | A. The requirements defined in R2 do not account for game elements. Thus partial obstruction by anything but the ROBOT (e.g. TOTES, other ROBOTS, etc.) do not result in a violation of R2. 2) Yes, there is no requirement that the digits of a team number be co-planar, however R2-B requires that an observer can "unambiguously" identify the team number. |
|
#3
|
|||
|
|||
|
Re: Split numbers on Robot
Think of your team number as an automobile license plate. But you need one on each side.
Dr. Bob Chairman's Award isn't about building a robot, every team builds a robot. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|