|
|
|
 you are going to gear that down right? Otherwise your robot will take about 10 minutes to reach its top speed of mach 2.6. - M. Hicken [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| you are going to gear that down right? Otherwise your robot will take about 10 minutes to reach its top speed of mach 2.6. - M. Hicken [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
03-02-2015, 19:24
|
|||
|
|||
|
Re: Custom Dashboard
Is your custom dashboard written in Java?
If so, are you able to get the SmartDashboard to load per those instructions, just to make sure java is working right? 
|
|
#3
03-02-2015, 19:33
|
||||
|
||||
|
Re: Custom Dashboard
My custom dashboard is written in java
I'm unsure how you would implement it in smartdashboard, since I coded it with jframes.
|
|
#4
03-02-2015, 19:55
|
|||
|
|||
|
Re: Custom Dashboard
I just wanted you to try getting the SmartDashboard to work to make sure the DS is able to load a Java program. I have heard of cases where Java had to be specified as an absolute path.
If you can get the SmartDashboard to work then there is probably something wrong with your custom dashboard.
|
|
#5
03-02-2015, 20:44
|
|||
|
|||
Re: Custom Dashboard
The command it runs is basically same command it would run in command prompt. I would recommend running the command in command so you will be able to see if there is an error. If everything works there then copy the command you ran into the driver station config file.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
