Pressure transducer manufacturer?

[jajabinx124]

So this season our team has been looking into using a pressure sensor to tell us what pressure our robot is at. We found a nice and cheap transducer on ebay but we found no model number or manufacturer name on the link. We've seen some other transducers on digi key but they cost $60 more dollars then the cheaper one on ebay. I've seen some other threads talking about the cheaper one and recommending it. The sensor seems like a attractive option to us but we need some sort of manufacturer name to put on our BOM.

Link to the Pressure transducer
http://www.ebay.com/itm/Pressure-tra...6662ac&vxp=mtr

Link to other CD threads it was mentioned in
http://www.chiefdelphi.com/forums/sh...e+transdu cer

[Greg Needel]

We bought a few different ones to try. This one is accurate, light weight and cheap. We are using 2 of them on our bot this year.

http://www.amazon.com/Eyourlife-Univ...dp/B00RCPDCQU/

[Daniel_LaFleur]

Originally Posted by Greg Needel

We bought a few different ones to try. This one is accurate, light weight and cheap. We are using 2 of them on our bot this year.

http://www.amazon.com/Eyourlife-Univ...dp/B00RCPDCQU/

Which range do you use, 200PSI?
How linear is that transducer? 50PSI/V from .5V-4.5V?

[jajabinx124]

Originally Posted by Greg Needel

We bought a few different ones to try. This one is accurate, light weight and cheap. We are using 2 of them on our bot this year.

http://www.amazon.com/Eyourlife-Univ...dp/B00RCPDCQU/

Do you happen to have a specs sheet for this transducer? I didn't seem to find one.