|
|
|
 ...your stress reliever is a ziptie with the end cut off so you can pull it straight through. It really works! - Storcky [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| ...your stress reliever is a ziptie with the end cut off so you can pull it straight through. It really works! - Storcky [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#10
09-02-2015, 11:06
|
||||
|
||||
|
Re: Blown talon srx modules
If P2 is the maximum mechanical power you can draw from a CIM's output shaft for a given input electrical power P1, and P3 is the maximum electrical power you can draw from a CIM whose output shaft is being driven with mechanical power P2, then P3 is considerably less than P1. Reason: motor losses work in both directions. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode