Can't Connect to roboRIO or DLink

[Alan Anderson]

Nothing you describe matches anything I can think of. Do you know any other teams in the St. Louis area that might be able to help you in person with some basic troubleshooting? There could be something obvious that you don't know to look for or to tell us about.

[samfruth]

Just ran into this problem myself, or at least I think I did.

I solved it by changing my IPV 4 to 10.xx.yy.3 (xx and yy being team number) and was able to connect immediately. Don't know if it will work but worth a try at least.

[Donut]

Check the lights on the RoboRIO after it starts up, and compare with the status light info on this page to make sure the issue is not with the controller:
http://wpilib.screenstepslive.com/s/...uick-reference

When we first setting up our controller it exhibited similar behavior, it turns out it was because we hadn't properly image the RoboRIO when we thought we had. The Status and Comm lights should help narrow down the issue.