Light Codes on Victors - Chief Delphi

The only thing I am learning from this thread is the difference between who is arrogant enough to objectify their own interpretations and who is wise enough to question their own interpretations. - Michael Corsetto [more]

		Chief Delphi > Technical > Electrical
Light Codes on Victors

Thread Tools

Rate Thread

Display Modes

15-02-2015, 13:43

mshafer1

Programming Mentor

AKA: Matthew Shafer

FRC #3937 (Breakaway)

Team Role: Mentor

Join Date: Jan 2015

Rookie Year: 2008

Location: Arkansas

Posts: 58

mshafer1 is an unknown quantity at this point

Re: Light Codes on Victors

Quote:

Originally Posted by Mr V

Yes that is normal for them to only be solid red or greeen when they are commanded for 100% power. Less than 100% power and they will blink and that blink will be somewhat proportional to the commanded power.

I would also recommend that you keep in mind the fact that the human eye sees at approximately 80Hz, so if the pwm signal has a higher frequency, the LED will appear solid (in whichever color).

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:39.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.