|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools |
Rating:
|
Display Modes |
|
#31
|
||||
|
||||
|
Re: Encoder Wiring
Use 2 DIO channels on the RIO. encoderA goes to signal on one DIO, encoderB goes to signal on the other DIO. encoder ground and power go to ground and power on one of the 2 DIOs. |
|
#32
|
|||||
|
|||||
|
Re: Wiring Question
Getting the two PWM signals to match is probably the least likely cause of the problem, (more likely mechanical mismatches or uncalibrated controllers), though I do recall seeing at least one case this year.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|