|
Re: Rules issues...
No, see rules R68, and R69.
Quote:
|
Originally Posted by Manual Section 4.10 Pneumatic System
R68 Compressed air on the ROBOT must be provided by one and only one compressor. Compressor specifications may not exceed nominal 12VDC, 1.05 cfm flow rate.
R69 The compressor (permitted per R68) may be located off-board, however the compressor must still be controlled and powered by the ROBOT.
|
You can, however, fill the tanks with the robot compressor before a match.
Quote:
|
Originally Posted by R69 Blue Box
The compressor may be mounted on the ROBOT, or it may be left off the ROBOT and used to pre-charge compressed air in storage tanks on the ROBOT The intent of this rule is to permit teams to take advantage of the weight savings associated with keeping the compressor off-board. However, using the compressor off-board of the ROBOT does NOT permit non-compliance with any other applicable rules.
|
__________________
2013: Waterford Finalist, Livonia Winner, MSC Quarterfinalist, Curie Division
2012: Waterford, Northville, Livonia
2011: Waterford Finalist, Livonia
2010: Ann Arbor Rookie Inspiration Award, Troy
Mechanical Engineering Student,
Michigan Technological University
Last edited by Chris_Ely : 16-02-2015 at 20:25.
|
Ya know something I heard, UFH always look beter in PINK! :) - Kyle Love [more] 
16-02-2015, 20:23
Threaded Mode