|
RoboRIO power wires question
Disclaimer: It's 1:20 am after a long Stop Build Day session.
Regarding the power connector on the RoboRIO, does anyone have a suggestion for connecting the wires well? I've never liked that type of connector, even on the cRIO, because of a tendency for the wires to loosen out. The connector is nicely secure to the RIO, but the other side of the connector is a pain for us.
Backstory: today shortly before bagging the robot, we had some issue deploying code (don't know the cause, and probably won't until out-of-bag time), but I went and touched the RoboRIO power wires, and they must have arced together because we blew the 10A fuse. Thankfully, the roboRIO is fine (briefly tested with 20A fuse to ensure it would turn on).
Edit: and the RoboRIO is powered by 18 AWG wire.
__________________
2015-present: FTC 10723 mentor
2012-present: 857 mentor
2008-2011: 857 student
2015: Industrial Design, Excellence in Engineering, District Finalist, Archimedes Division (#6 alliance captain)
2014: Judges Award, District Engineering Inspiration, District Finalist, Galileo Division
Last edited by Christopher149 : 18-02-2015 at 01:30.
|
It's rather simple: you start with a block of solid and remove material until you just have the robot left. Kind of like making a sandcastle. Only harder. - petek [more] 
Threaded Mode