|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: Powering roboRIO with old PD Board
The roboRIO wants raw battery voltage. Feed it from one of the small red/black Wago pairs protected by a 20-amp breaker. If you have any 10-amp breakers, you can use one of them instead.
|
|
#2
|
|||
|
|||
|
Re: Powering roboRIO with old PD Board
Thank You!
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|