Kept out of the bag

[EricH]

Originally Posted by Mike Marandola

Are you sure that's the case since CIMs and miniCIMs are still commercially available? If that's true, wouldn't shortening the leads make it a non-COTS item?

Yes, it is the case. You have cut the shaft, therefore you have modified the motor, therefore it is a Fabricated Item and not COTS. See the first sentence of the definition of COTS.

However, for the second part, I suggest that R12C takes precedence--but still defines the motor as a Fabricated Item, regardless of the status of the output shaft.