|
|
|
 Mentor: How is that held in place?
CAD Lead: Go to the hardware store and buy a bag of constraints and put the constraints on the robot. - Kenyow [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Mentor: How is that held in place?
CAD Lead: Go to the hardware store and buy a bag of constraints and put the constraints on the robot. - Kenyow [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Goat .stl
If any of you have a 3D printer and want your own miniature goat I have found the CAD for you! Here is the link: http://www.thingiverse.com/thing:294667
Under downloads there is a file called Goat_whole.STL that's the one i'm going to use. I will post a picture of mine once it is printed! I was debating where this would belong, here or in the CAD forum. 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
