T-shirt Launcher

[Sperkowsky]

Originally Posted by Daniel_LaFleur

Something like This would probably work. It's designed for use with Air and is safety rated to 72PSI.

It's flow may be too restricted though ... I haven't done the calculations.

It also has BSP threads so connecting to it is ... fun.

so we would need to buy
1.that solenoid
2.harbor freight 5 gallon air tank
3.3 or 2 inch wide metal conduit

and we would also need to use(that we have)
1.compressor
2.normal tubing
3.chassis

and some fittings.

is there any weird adaptors or entire components im missing.

[Daniel_LaFleur]

Originally Posted by Sperkowsky

so we would need to buy
1.that solenoid
2.harbor freight 5 gallon air tank
3.3 or 2 inch wide metal conduit

and we would also need to use(that we have)
1.compressor
2.normal tubing
3.chassis

and some fittings.

is there any weird adaptors or entire components im missing.

You'd want a dump (ball) valve, an overpressure (Poppit) valve, and a pressure switch to shut off your compressor at a safe pressure.

Other than that, it looks like you have a good list.