T-shirt Launcher

[GeeTwo]

Originally Posted by Sperkowsky

What valve do you recommend.

We're using one that looks just like this (I think it's the same one). We're switching it with a relay module, though a spike would also work. We have two barrels, and one of these on each. We often fire them about a tenth of a second offset from each other; 50ms for each to be open is more than enough.

We currently have all steel, brass, and rubber up to the final nozzle, and PVC barrels. Based on what I've read here, we'll be making some mods before next football season.

BTW, we did not use a 'RIO for our air cannon - an arduino on the robot with an xBee comms module, and a remote with just an xBee module and a 9V battery and some buttons/joysticks to dive, shoot, and someday aim in azimuth. Our accumulator is filled manually from a scuba tank; the accumulator holds enough for about 40 good shots before losing pressure.