|
|
|
 changing some 0 to 1s was a lot lighter and cheaper than most of the clutches I found. - IKE [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| changing some 0 to 1s was a lot lighter and cheaper than most of the clutches I found. - IKE [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
08-03-2015, 17:29
|
||||
|
||||
|
Re: pic: Game piece to robot part
This is our low-tech solution that allows our HP to build two-tote stack while our robot carries the previous stack to the scoring platform.
The other lesson learned at GTRC was that the chute on the competition field (built with lexan) is smoother than the wooden version on the practice field. So, the totes come out faster and we needed to compensate for that. Hope this helps. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode