|
|
|
 Even though others have had success, I will be honest, this method sort of creeps me out. - Joe Johnson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Even though others have had success, I will be honest, this method sort of creeps me out. - Joe Johnson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
08-03-2015, 23:25
|
||||
|
||||
|
Re: Talon SR Help
Sounds like a miscalibrated Talon. Look on page 7 here, and try calibrating the Talon - there's a good chance that this'll fix it.
As far as using a Victor SP, it's generally not recommended to use different motor controllers on the same gearbox. Different controllers have different response curves, so you'll probably end up with one motor doing more work than another. It's not necessarily unsafe, per se, just not recommended. Last edited by Jacob Bendicksen : 08-03-2015 at 23:27. Reason: added manual link 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode