Home Depot In-store donation

[jvriezen]

Originally Posted by philso

A belt sander is also easier to use SAFELY than a grinder.

One alternative is to get a bunch of good quality drill bits (multiples of the commonly used sizes) and a few Deburring Tools.

A second alternative is to get a small Band Saw. It's not the greatest but it will be easier to get good cuts on tubing and sheet goods than with a hacksaw.

A third alternative would be to get some clamps. On the weekend, I saw some good quality Bessey brand clamps on sale in one of our local stores.

Thanks for the tip on the deburring tool. My previous team had one, and we've been missing one on my new team. Tried a couple other places that didn't have that type. Didn't realize HD carried those.

[philso]

Originally Posted by hionwind

This looks like a great deal:

http://www.homedepot.com/p/Ryobi-One...6?N=5yc1vZc7jj

^
|
|
+1
This is the first Ryobi product I would consider purchasing for myself. It is reasonably well made and has sufficient power for everything our team needs it to do. Our team has two of these drills, 6 batteries (4 compact + 2 high capacity) and a 6-Port-SuperCharger. With 10-20 people working, we never run out of batteries except when we were cutting "speed holes" in our chassis with a couple of hole saws. The batteries charge very quickly (under half an hour, I think).

Originally Posted by jvriezen

Thanks for the tip on the deburring tool. My previous team had one, and we've been missing one on my new team. Tried a couple other places that didn't have that type. Didn't realize HD carried those.

I found them in the tool section of the plumbing department. I got a good workout the weekend before Bag & Tag using one of these to clean up all our "speed holes". Unscrew the cap on the end of the handle and remove the spare blade. Put the spare blade somewhere safe, say in your tool box. We found that the end cap tends to unscrew on it's own, allowing the spare blade to fall out and get lost.

[jvriezen]

Decision made, thanks all:

http://www.homedepot.com/p/Ryobi-Ben...601G/205509608

Plus some miscellaneous things like deburring tool(s) and maybe various sanding belts/discs to go with it.

Also thanks for the tip on the saving the deburring spare blade.. Not sure putting it in a safe place will make it findable either with how things go in our 'shop'