Go to Post During 5th week, EVERYTHING becomes a programming problem... hahah. - Mr. Lim [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 16-03-2015, 14:22
Mschmeh144's Avatar
Mschmeh144 Mschmeh144 is offline
Impatient maniac
AKA: Matthew
FRC #0144 (R.O.C.K)
Team Role: Driver
 
Join Date: Jan 2015
Rookie Year: 2014
Location: Ohio
Posts: 88
Mschmeh144 is an unknown quantity at this point
Pressure gauge venting

Hello
Just a quick question here since its on my mind
On our 2013 bot, the pressure regulator will beging to "vent" or leak, not sure which, when we keep a dedicated supply hooked up to it ie a shop compressor. Is that normal? The holding pressure for both the tanks on the robot are 120psi and the regulator is set to 60 psi (probably need to up the psi because the piston is a bit weak). There isn't a leak anywhere and the shop compressor is set to put out 120psi through to the robot ( we hook it up through a quick disconnect system ) is there a problem with the regulator or somewhere else? This isn't urgent, the bot performs just fine, he has no onboard compressor. I just would like to figure out if there's a hidden problem I'm not seeing
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:38.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi