Also, in addition to using sensors to stop your lift, be sure to have said sensors included in autonomous. Otherwise, you can have bad things happen to your robot. Case in point:
http://i.imgur.com/jTXfc1l.jpg
That's a 10:1 stage from a versaplanetary. We had to start an autonomous mode with our elevator down at the bottom of the robot. In teleop, we have a limit switch that stops the motor from applying downward force on the elevator. It was never included in autonomous because the elevator was never intended to travel anywhere near the bottom of the robot. Needless to say, bad things happened.
(Special shoutout to 3663 CPR for the assist. We were up and running for the next qualification match like nothing had happened.)
__________________
3826: 2013 Seattle Regional Industrial Design Award & Semi-Finalists
4918: 2014 PNW Glacier Peak District Event Rookie Inspiration Award & Quarter-Finalists, 2014 PNW Mount Vernon District Event Highest Rookie Seed Award, Rookie All Star & Semi-Finalists, 2015 PNW West Valley District Event Engineering Excellence Award & Semi-Finalists, 2015 PNW Mount Vernon District Event Semi-Finalists
Visit us on the web at
www.team4918.org
Remember to drive it like you stole it but be sure that it is in OVERDRIVE. - Steve W [more] 
17-03-2015, 16:34
Threaded Mode