|
|
|
 Big scoop for everyone here:
All divisions are stacked with talented teams. It's like this is a really big event or something. - PayneTrain [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Big scoop for everyone here:
All divisions are stacked with talented teams. It's like this is a really big event or something. - PayneTrain [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
18-03-2015, 09:31
|
||||||
|
||||||
|
Re: [FTC]: VEX PRO Mecanum Wheels mounted on tetrix axles?
http://www.andymark.com/product-p/am-2609.htm
This part is what you need. All the larger wheels made by AndyMark and vex both use a 1.875 bolt hole circle for attaching sprockets and gears. The plate I linked to has the right hole pattern to bolt to your vex wheels and the center is setup for one of the standard tetrix hubs. You could easily make this part if purchasing is not an option. Greg 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode