Team 1389 Presents Liftzilla

[staplemonx]

https://www.youtube.com/watch?v=2u9GTRjwjxk

Specifications: http://team1389.com/wp-content/uploa...3/1-pager.docx

• Drivetrain Speed: 12 ft/sec
• 6 wheel mullet drive using AndyMark 4" Performance and Omni Wheels
• 1 stage elevator, ground to max height in less than 2 seconds
• 4 sided powered stack stabilizing
• Acceleration control stack stabilizing
• Rear load feeder ramp
• Side container lift tabs
• Lift location sensors
• Navx field location capability

Robot Has demonstrated

• The ability to build 1-6 tote stacks with CT
• The ability to place 1-3 tote stacks with CT
• The ability to pick up vertical Containers
• The ability to place vertical containers on 3 stacks
• The ability to do two 3 tote + container stacks in 2 min
• Placing 3 totes on step
• 4.5 second per tote loading

Robot Plans to demonstrate

• The ability to place 4-6 tote stacks with CT
• The ability to pick up horizontal Containers
• The ability to place horizontal containers on 4 stacks
• The ability to do two 5 tote + container + noodle stacks in 2 min
• 20 pt auto
• 2 container off step auto
• 3 second per tote loading

We will be competing at
Greater DC Regional – 3/26/15 to 3/28/15 – George Mason University, VA
Chesapeake Regional – 4/2/15 to 4/4/15 – College Park, MD

[staplemonx]

Here is the CAD http://team1389.com/wp-content/uploa...C1389_2015.rar