|
|
|
 Most of our old robots have been scrapped for parts. Our Chairman submissions are still read every year by the whole team. - N7UJJ [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Most of our old robots have been scrapped for parts. Our Chairman submissions are still read every year by the whole team. - N7UJJ [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#12
22-03-2015, 14:38
|
|||
|
|||
|
Re: mjpg-streamer running on roboRIO
When I try to run this, I'm getting an error opening the /dev/video0 device. I have a Logitech P930e plugged in, which should certainly support the requested mode.
Code:
admin@roboRIO-2877:/var/local/natinst/www/mjpg# source start.sh MJPG Streamer Version: svn rev: i: Using V4L2 device.: /dev/video0 i: Desired Resolution: 640 x 480 i: Frames Per Second.: 5 i: Format............: MJPEG Unable to set format: 1196444237 res: 640x480 Init v4L2 failed !! exit fatal i: init_VideoIn failed admin@roboRIO-2877:/var/local/natinst/www/mjpg# ls -l /dev/video0 crw-rw-rw- 1 admin ni 81, 0 Dec 31 1969 /dev/video0 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode