Custom Driver station

[Alan Anderson]

The rules are in the Game Manual, Section 4.11 "OPERATOR CONSOLE". Specifically <R80>:

The Driver Station software provided on the National Instruments website is the only application permitted to specify and communicate the operating mode (i.e. Autonomous/TELEOP) and operating state (Enable/Disable) to the ROBOT. The Driver Station software must be revision 08021500 or newer.

I doubt that it's possible, but if you manage to get a Raspberry Pi to run that specific Windows application, you'll meet the requirements.

[Nyle]

Without having the source code for the driver station, or convincing NI to publish an ARM build of the driver-station, it can't be run on a raspberry pi because of its architecture. What's your reason for wanting to use a raspberry pi in the first place? We might be able to suggest a legal way to accomplish it. If you're looking to set up a custom input panel, the TI MSP-430 that were in the kit are easy to use; here's a good guide on how to use them. If you want the pi to be there to run some software, you could pick up one of these to have it talk to the computer.