Go to Post How come the dropped tool ALWAYS rolls under the exact center of the workbench? - DonRotolo [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 17-04-2015, 10:03
Mschmeh144's Avatar
Mschmeh144 Mschmeh144 is offline
Impatient maniac
AKA: Matthew
FRC #0144 (R.O.C.K)
Team Role: Driver
 
Join Date: Jan 2015
Rookie Year: 2014
Location: Ohio
Posts: 88
Mschmeh144 is an unknown quantity at this point
Crio error when deploying

Hello all

I am now doing the programming of our tote bot, and during testing today, I found that the c-rio would not accept the code, and reported back this message that says something along the lines of " error, this version of labview on the host computer is not the same as the version on the target""update using MAX"

What does this mean? I'm not a full blooded programmer, as they say, I'm good at everything, and a master at nothing. So I have no clue how to fix it. I understand what it means. am I just doing something wrong?

Specifics
Deploying code over wireless link
Using a old CRio, four slot
Connected to digital sidecar and pdb( blue, old type)
Radio connected via 5v converter.
Sidecar connected via flat ribbon cable, slot 2 on CRio
When first powered on, found that there is in fact code already on the CRio ( probably code from 2012, that's the last time this CRio was used ) and the rio still responds to driver station commands, evident by victor motor controllers functioning.
No flash on the connected RSL, on the sidecar.

So, what's wrong here? The RSL doesn't work,it won't let me deploy code,but it still works with the code that's on it already
  #2   Spotlight this post!  
Unread 17-04-2015, 10:22
Mark McLeod's Avatar
Mark McLeod Mark McLeod is offline
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,906
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: Crio error when deploying

It means that the image currently on the cRIO is based on a different version of LabVIEW than the code you are building on your PC.

Check the version on the cRIO using the Imaging tool, and compare it to the latest cRIO image installed on your PC (listed in the Imaging tool for optional imaging).
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:14.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi