|
I just HAVE to thank team 60 and Laron Engineering for the machine shop!!!
We would not have done as well as we did without their help... they bored and broached 2 sets of 4 sprockets for us in less than 20 min !!!
We frantically went out and bought new 25 and 30 tooth sprockets when we realized how slow our robot was on the field...
The turnaround with those guys was great!! THE BEST machine shop at any regional or national competition.
Thanks guys!!
As far as the regional went...very organzied, very professional, and one of the best regionals i have been to. The teams were extremeyl nice, and the entire event was very relaxed and enjoyable.
Only things i would change: Easier access to the pit from the stands, and for those teams stuck in the center row, slightly larger pit areas (we were lucky enough to have a corner)
Thanks to teams 460, and 606 for a great alliance, we couldnt have done it without you.
Travis - Advisor, Team Mentor
__________________
-Travis Covington
2008-2017 - Engineering Mentor of Team 254
2001-2008 - Engineering Mentor of Team 968
1998-2001 - Mechanical Director/Driver/Member of Team 115
|
We had an over all losing record this year. When I look at kid's faces, they don't give a rip about that. I see excitement about the next event and talking about improvements for next year. Winning is nice, but that is not the reason I do what I do. - wilsonmw04 [more] 
16-03-2003, 21:02
Similar Threads
Threaded Mode