|
|
|
 You can't expect a situation to get better if you don't make an attempt to confront it. - AndyB [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| You can't expect a situation to get better if you don't make an attempt to confront it. - AndyB [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#27
12-05-2015, 09:48
|
|||
|
|||
|
Re: Using the TI LaunchPad from your KoP
It seems that for the USB interface, I could use the USB interface (FTDI2232H) that is already on the LP and connects to the JTAG port and an SCI port on the TMS320F28069. It also seems that if I remove/open JP1 and JP3, the USB interface would "float" and be powered from the host computer.
Thanks for the recommendation for RealTerm. It would be a great way to get started. Later, I would still want to implement some sort of Visual Basic or Visual C program running on the host to set operation modes and monitor progress in a way that is more user friendly. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode