Go to Post Give us six more motors in the kit, and we'll try and come up with something... - Karthik [more]
Home
Go Back   Chief Delphi > ChiefDelphi.com Website > Extra Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rating: Thread Rating: 10 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
  #27   Spotlight this post!  
Unread 15-05-2015, 00:55
Joe G.'s Avatar
Joe G. Joe G. is online now
Taking a few years (mostly) off
AKA: Josepher
no team (Formerly 1687, 5400)
Team Role: Mentor
 
Join Date: Sep 2006
Rookie Year: 2007
Location: Worcester, MA
Posts: 1,451
Joe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond repute
Send a message via AIM to Joe G.
Re: pic: Manually machinable one-speed gearbox

Been running belt in a tube structure formed from sheet metal for the past three years with no issues. The sheet metal works great because we can start with a readily available belt/sprocket combo and size the tube accordingly, rather than the other way around. Access is achieved by opening up the entire side of the tube, which makes installation a lot easier than the through-the-end approach or small access pockets required by extrusion.

It is a fair bit larger than the texas tube approach, due to the increased sprocket diameter/width, and the need to add additional clearance for the rivets which hold the tube together, but it works well with our resources, and we like the insurance it provides.
__________________
FIRST is not about doing what you can with what you know. It is about doing what you thought impossible, with what you were inspired to become.

2007-2010: Student, FRC 1687, Highlander Robotics
2012-2014: Technical Mentor, FRC 1687, Highlander Robotics
2015-2016: Lead Mentor, FRC 5400, Team WARP
2016-???: Volunteer and freelance mentor-for-hire

Last edited by Joe G. : 15-05-2015 at 01:57.
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 22:08.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi