Where to find the updates and driver station for LabVIEW 2014?

[Tom Line]

I'm trying to set up a laptop with the software capable of programming the 4 and 8 slot cRIO's. So I'm looking for a copy of Labview 2014, and the FIRST updates + the driver station. Anyone have links for it? Most all the NI links point to 2015 (even the ones labelled 2014).

[Bpk9p4]

You can get both from here
https://decibel.ni.com/content/docs/DOC-34731

I am not sure if it will work with the cRIO but that is what teams used this year for the roborio

[wt200999]

Originally Posted by Tom Line

I'm trying to set up a laptop with the software capable of programming the 4 and 8 slot cRIO's. So I'm looking for a copy of Labview 2014, and the FIRST updates + the driver station. Anyone have links for it? Most all the NI links point to 2015 (even the ones labelled 2014).

To be clear, are you referring to the software from the 2014 FRC season?

In 2014 we used LabVIEW 2013, this year we use LabVIEW 2014 (called FRC 2015 listed on the NI site pointed to in the above post by Bpk9p4).

[ozrien]

Hey Tom, I still have the install disks for Aerial Assist, if you want to borrow PM me or stop by the office. Not sure about the mid-season updates though, I can't find those on my PC.

[Tom Line]

Yep - I'm referring to the software we used for Aerial Assist, that is still compatible with the 8 slot cRIOs. Does anyone have the driverstation / updates on file somewhere?

[Doug Norman]

I'll look into putting the LabVIEW for FRC 2014 installers on our web site. Of course you will still need your serial number to license the install.

Update - I found that we have the FRC 2014 installers available here.

Look for these links:
Download the 2014 NI Software for FRC
Download the 2014 Update Suite