|
Re: Bevel/Miter Gear Mounting Distances
When designing these you will need to have the bearing flanges on the miter/bevel side to take the axial load into the structure. I would also recommend a thrust bearing, an Oilite bronze bearing is ideal for this application. The Bearing Flange is 1/16" thick, and the Oilite Bearings are normally 1/16" thick in this size range. So make sure to account for another 0.125" behind each gear.
__________________
Thank you 2016 Alliance Partners - 948, 1510, 2046, 2521, 2980, 2990, 4911, 4683
|
NEMO is a virtual organization with a virtual headquarters and virtual bank account.
- KathieK [more] 
03-09-2015, 00:46
Threaded Mode