Go to Post Don't let what you think you can do get in the way of what you can do. - Daniel_LaFleur [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 24-09-2015, 18:33
Joey1939's Avatar
Joey1939 Joey1939 is offline
Registered User
AKA: Joey Holliday
FRC #1939 (Kuhnigits)
Team Role: Programmer
 
Join Date: Jan 2014
Rookie Year: 2014
Location: Kansas City, Missouri
Posts: 143
Joey1939 has a spectacular aura aboutJoey1939 has a spectacular aura aboutJoey1939 has a spectacular aura about
Mysterious CNC Machine

Pictures

This CNC Machine has been sitting in our barn for an unknown number of years. It appears that a student or mentor made it themselves, but no current members know where it came from. We understand how it works mechanically, but our question is how do we go about controlling it.

1. Assuming this board still works, how do we connect and control it?
2. Is there a board that could replace the current control board?

Thanks for any help. We want to get this working because we don't have any other CNC capabilities.
__________________


  #2   Spotlight this post!  
Unread 24-09-2015, 20:21
techhelpbb's Avatar
techhelpbb techhelpbb is offline
Registered User
FRC #0011 (MORT - Team 11)
Team Role: Mentor
 
Join Date: Nov 2010
Rookie Year: 1997
Location: New Jersey
Posts: 1,624
techhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond repute
Re: Mysterious CNC Machine

Seems to be an older version of this:
http://www.super-tech.com/root/ITM-EMC-MightyBox.html

Need Mach3 or similar to control the mill with G-code.
Mach3 will use the DB25 parallel port interface on that PCB.
The PCB is a driver for the stepper motors.
That interface depends on accurate step timing from the parallel port - so it might not work right on some PC.

To configure Mach3 you will need to determine things like the turns per inch of the axis.
Also how many steps per stepper full revolution.

I would recommend the Gecko G540 to replace it.
http://www.geckodrive.com/geckodrive...ives/g540.html
However make sure to call Gecko with the stepper information before you consider that. I can not see the labels.

Last edited by techhelpbb : 24-09-2015 at 20:26.
  #3   Spotlight this post!  
Unread 24-09-2015, 23:37
sanddrag sanddrag is offline
On to my 16th year in FRC
FRC #0696 (Circuit Breakers)
Team Role: Teacher
 
Join Date: Jul 2002
Rookie Year: 2002
Location: Glendale, CA
Posts: 8,519
sanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond reputesanddrag has a reputation beyond repute
Re: Mysterious CNC Machine

I'd recommend LinuxCNC over Mach3. For either you need the pinout if the DB25 connector to determine which pins to set as step and direction for each axis. Shouldn't be too hard to determine.
__________________
Teacher/Engineer/Machinist - Team 696 Circuit Breakers, 2011 - Present
Mentor/Engineer/Machinist, Team 968 RAWC, 2007-2010
Technical Mentor, Team 696 Circuit Breakers, 2005-2007
Student Mechanical Leader and Driver, Team 696 Circuit Breakers, 2002-2004
  #4   Spotlight this post!  
Unread 24-09-2015, 23:50
asid61's Avatar
asid61 asid61 is offline
Registered User
AKA: Anand Rajamani
FRC #1072 (MVRT)
Team Role: Mechanical
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Cupertino, CA
Posts: 2,231
asid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond reputeasid61 has a reputation beyond repute
Re: Mysterious CNC Machine

It looks like it's just stepper motors. If you can't find any specs on the existing control board, then you can just order a new board and attach the wires after looking at the motor specs.
Nice find!
__________________
<Now accepting CAD requests and commissions>

  #5   Spotlight this post!  
Unread 25-09-2015, 03:37
techhelpbb's Avatar
techhelpbb techhelpbb is offline
Registered User
FRC #0011 (MORT - Team 11)
Team Role: Mentor
 
Join Date: Nov 2010
Rookie Year: 1997
Location: New Jersey
Posts: 1,624
techhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond reputetechhelpbb has a reputation beyond repute
Re: Mysterious CNC Machine

Quote:
Originally Posted by sanddrag View Post
I'd recommend LinuxCNC over Mach3. For either you need the pinout if the DB25 connector to determine which pins to set as step and direction for each axis. Shouldn't be too hard to determine.
No issue with the LinuxCNC recommendation but I think Super Tech can provide a Mach3 configuration with the parallel port pinout already considered.

If they start trying to mess around with parallel port details they will get into the weeds with: ECP/EPP/SPP and DMA/interrupt assignments as well depending on the configuration of their PC.
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 20:27.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi