2x1 and 2x2 1/16" wall 6061-T6 Tubing for Sale

[roystur44]

FYI,

Welding on the lighter gauge alum is a little harder. You need to think out the amount and placement of the welds and have a good fixture to get everything square. If you are going to be using bearings you might need to supplement the way the bearing is held in the lighter gauge alum.

[jwfoss]

Originally Posted by page2067

Can we order smaller quantity? - say half - what will adjustment be?

Rick, perhaps we could split and order since we are right up the road.

[jeremylee]

Adam, I am also interested in what a half order would cost, what payment options there are, and an end date for orders.


I've found this calculator helpful in estimating weight of various materials. It seems I could shave a couple pounds on a WCD by going 1/16" wall over the .1" VersaFrame.
http://www.onlinemetals.com/calculator.cfm

[Knufire]

I believe Adam prefers full orders due to shipping (he has 8"x8" square profile boxes). That being said, organizing a group buy for teams around your area can help you get up to the minimum order size. 5188 recently organized one for Indiana and everything is going smoothly.

[AdamHeard]

We will run this indefinitely, but it will be easier for us to be more responsive with shipping during the offseason.

[page2067]

Originally Posted by jwfoss

Rick, perhaps we could split and order since we are right up the road.

Sounds good Justin - I pm'ed you and we can discuss details

Any other CT teams interested we can coordinate as well - looking to submit order fairly soon.

[electroken]

Originally Posted by page2067

Sounds good Justin - I pm'ed you and we can discuss details

Any other CT teams interested we can coordinate as well - looking to submit order fairly soon.

I think we need to get in on this too.

[Michael Hill]

We just received our tube yesterday. Looks great. Didn't see any dents from shipping to Ohio. Thanks Adam for setting this up.

[BrendanB]

Originally Posted by jeremylee

Saw this earlier today, I thought OnlineMetals didn't carry this before?

https://www.onlinemetals.com/merchant.cfm?pid=6993&step=4&showunits=inches&id=1 268&top_cat=60

Sorry for a thread revival.

Since Online Metals continually sends out coupons and I had a decent one I ordered a piece of the 2x1 1/16th 6061 tube from Online Metals. While the picture shows round corners it does in fact come with sharp corners.

Adam has a cheaper option but if teams preferred going with the Online Metals version later for some reason don't worry about the picture it won't come with rounded corners.

[Bruceb]

Looking to maybe split an order of this. Perhaps one of 1x2 and one of 2x2.
Any teams in SE Wisconsin interested?

[jkelleyrtp]

Any NC/VA/SC teams interested?

[orangemoore]

Any Chicago area teams interested in splitting?

[page2067]

A couple weeks now ago we received our 32 pc x 5'x 1"x 2" x 0.0625" tubes
we then split it with our friends 558 , each happy with a half order.
Here to report happy consumers from NE.

[Nebster]

Originally Posted by Bruceb

Looking to maybe split an order of this. Perhaps one of 1x2 and one of 2x2.
Any teams in SE Wisconsin interested?

Team 1306 might be interested in splitting an order, I'll go over it with some people and get back to you. We're from Madison so not exactly SE Wisconsin but we could make it work.

[AdamHeard]

Teams have reached out to us asking if we are willing to sell predrilled tubing, so we're going to start doing that going forward.

We have;
1x1x1/16" predrilled w/ .201 holes on all faces on .5" intervals. $40 per 5' length.

2x1x1/16" predrilled w/ .201 holes on all faces on .5 intervals $55 per 5' length.

I'd recommend using Vex's tubing over ours if possible due to the lower price, but some teams have really wanted the .201 holes and holes on all faces.